Transformer
Showing all 10 results
-
PRODUCT FUNCTION
Drop out surge arrestors are MOV based devices that are designed to protect against the damaging effects of spikes and transients caused by lightning, utility switching, isolation arching, electrical motor cycling, or any other sudden change in the electrical power flow on incoming AC power lines. Lightning damage, is responsible for a large percentage of over-voltage occurrences, these are either direct strikes to a line or induced voltages onto the line. (strikes within 40m of a line).
Drop out surge arrestors prevent flashover between phases, prevent damage to poles and protect transformers from lightning damage and surges. Live Line Arrestors can be intelligently placed on lines in problem areas where equipment is consistently damaged.
The placing of Drop out surge arrestors has proven to be more cost effective than improving the insulation of poor performing lines. A spent Drop out surge arrestor can be exchanged for a new unit within minutes with the aid of a link stick and with the system energized. This eliminates unnecessary outages and lost revenue for the electrical utility.
-
33KV – 36KV Medium Voltage Drop-out Fuse Cutout Switch
Product introduction:
Fuse Cutout with Porcelain Base is mainly used to protect distribution lines and
transformers against overload and short-circuit damage. It can also be an overhead
disconnection switch with the use of a portable load-break tool. The fuse cutout is
developed to fit common service conditions.
-
The VersaRupter uses a puffer and nozzle system to quickly and efficiently extinguish the arc of full-load interruptions. The rated voltage – 4.76-38 kV, normal rated current: 200-1200 A.
The VersaRupter is a very compact switch allowing upright and inverted mounting, with front, left or right side operation. VersaRupter is available with a choice of manual direct or chain-drive manual open/close operation, motorized closing, shunt trip and two-step grounding options. Current-limiting fuse mountings are also available.
-
IEC/ANSI indoor vacuum circuit breaker Vmax
Medium Voltage circuit breaker with mechanical actuator (spring mechanism) for primary distribution, up to 17.5 kV, 2000 A, 31.5 kA.
Vmax breakers are used in electrical distribution for control and protection of cables, overhead lines, transformer and distribution substations, motors, and transformers.
The Vmax breaker family is available for IEC and ANSI applications:
-
IEC outdoor ring main unit SafeLink CB
Metal enclosed RMU with IP54 degree of protection with side and rear termination, suitable for outdoor conditions, up to 12 kV, 630 A, 21 kA for 3 sec
ABB’s newly launched SafeLink CB, outdoor ring main unit is ideal product suited for rural and urban distribution applications. The product is unique in terms of number of features and value it offers to the customer making it the ideal choice for various applications in utilities network for distribution, hotels, shopping centers, office buildings, business centers, light mining applications, airports, hospitals, tunnels and underground railways etc.
-
Nulec W-series
MV Pole-Mounted Automatic Circuit Reclosers
MV reclosers up to 38kV
The W-Series single phase, pole mounted auto recloser or circuit breaker was developed to achieve optimum performance and reliability, making use of the latest technology in solid dielectrics, vacuum interruption, and microelectronics. This device does not use any gas or oil insulants. Instead, a cyclo-aliphatic epoxy bushing is used to insulate the vacuum interrupter. This type of construction results in a more lightweight unit. With an integrated CT and VT, the design is optimised for automation, remote control, data logging and monitoring applications. The W-Series recloser is ideal for Single Wire Earth Return (SWER) applications.
-
Rated voltages: 21kV (nominal phase to ground)
-
Rated short-circuit current up to 6kA
-
Rated load current up to 400A
-
316 grade stainless steel tank
-
Single phase applications
-
SWER (Single Wire Earth Return)
-
10,000 operations
-